Wifi-connection
The e-mark connects with your mobile device (such as a smartphone or tablet) through an own generated WIFI-network. Imprints are transferred fast and it can be marked immediately.
Markings for exact positioning
Markings on the side of the e-mark ensure a reliable positioning on your documents by the help of advanced sensor technology. A notch in the middle of the marking shows the center line of the imprint. It works perfectly with COLOP labels.
Transparent window
A transparent window in the front provides a better view of the imprint during marking.
Light pipe
Rotating LEDs around the e-mark indicate the current state and connectivity to your mobile device
Tricolour ink-cartridge
Easily replaceable and long-lasting cartridge for high-quality full-colour imprints.
Printhead
The printhead is integrated in the cartridge and visible on the bottom side of the e-mark.
Battery
The inbuilt fast-charging Li-Po battery (11.1 V) allows using the e-mark for several hours (4.5 hours continuous marking) without connection to the grid. It is charged within 2.75 hours (0 - 100 %).
Docking station
The docking station serves for quick charging of the battery and helps prevent the printhead from drying out.
Protection cap
Is integrated in the docking station and optimally protects the printhead against drying-out. The e-mark should always be put in the docking station with its integrated protecting cap.
Sliding wheels
Move gently from left to right or the other way round to make an imprint, supported by sliding wheels.
Sensor
An optical sensor provides speed control for the best and most reliable imprint results.
USB-interface
Connect the e-mark with your computer via a Micro-USB cable. Note that charging can only be done with the power cable. Connect the e-mark with your computer via a Micro-USB cable. Note that charging can only be done with the power cable.
ON/OFF switch
Switch on the e-mark through an opening on the bottom of the docking station to avoid drying-out of the printhead.
Contacts
4 contact pins provide a connection between the e-mark and docking station for charging.
Protective cover
Can be easily opened to change a cartridge via a small notch on the bottom of the cover